+86 151 8970 3081

Get Copper wire recycling machine solutions from China

Copper wire recycling machine is used to recycle used cable wires, separating copper and plastic through a process of crushing, air separation or electrostatic separation, without the use of fire, water or chemicals, so there is no secondary pollution to the environment.

Copper wire recycling machine can accept these common wires and cables

The copper wire recycling machine recycles used cable by a crushing and separation process, so it has no restrictions on the size and type of cable input. Any construction wire and cable, industrial cable, low voltage cable, flexible wire, fixture wire or special purpose wire and cable such as battery lead wire, marine wire, bus bar, electric vehicle cable, lantern wire, distributed power generation cable, etc. can be recycled by the copper wire recycling machine.

Benefits of investing in Copper wire recycling machine

Take OTD400 as an example

Raw material: automotive wire, containing about 60% copper (different types of cables, copper content varies).

Processing capacity: 300kg/hour, 8 hours per day

Power consumption: 60Kw/H

Workers: 2 workers

Global metal prices are roughly the same, so take the Chinese market as an example for profit analysis.

Running cost/day    

InputQuantityPrice($)Input Cost($)Total Cost($)
1End-of-life cable300kg/h*8h=2.4T3285/ton78847994
2Energy consumption60Kw/H*8H=480KwH0.14/KwH67.2
3Workers2 workers21.42/day42.86

OutputQuantityPrice($)Revenue ($)Total Revenue($)
Daily Profit = Daily Revenue - Daily Cost = 9188.6 - 7994 = 1194.6($)

Why is copper so valuable?

Copper is corrosion resistant, conducts heat and electricity extremely well, and lasts longer than other conductors.

Copper is extremely difficult to mine.

It has a negative impact on the environment around the mining site. Keeping existing copper in circulation reduces the need for new copper mining and prevents unnecessary and irreversible damage to the environment.

Once the wire is removed from its rubber sheath, the copper core is worth more than most other metals. Keep in mind, however, that separating the copper from the rubber takes effort, so coated wire and cable will be worth a little less than stripped wire and cable.

Optima Cable Wire Recycling Machine

  • Automatic line with PLC control,adopt Italian MG technology,purity up to 99.9%.

  • Consist of granulator,vibration separator and dust removal system.

  • If copper mixed with armored cable,the single shaft shredder is required to do pre shredding.

  • It makes waste cable to cash.

Cable recycling

ModelDiameter range(mm)Capacity(kg/h)Total Power(kw)Installation Size(m)Applicable people
OTD50<2020-5030.8*0.8*1.7Individual users
OTD300<25100-200273.5*2*2.8Start-up recycling companies
OTD400<25200-300606*3.5*3.2Medium-sized recycling companies
OTD500<50300-700708*3.5*3.2Medium-sized cable manufacturers and waste recycling companies
OTD1000<50800-140015020*7*5.7Large cable manufacturers and waste recycling companies

You can get in touch with us via email or message!


Granulator bladeOur own special design,can be used 4 times.
Granulator bladeGranulator blade adopts the special alloy steel from the material properties and heat treatment process,more suitable for cutting copper cable.
Cyclone systemCyclone system can separate more than 90% of mica tape, PP film and other fillers from fine dust.

FAQ about Optima Cable Wire Recycling Machine

Read More

Contact Us

Mob: +86 151 8970 3081

Tel.: +86 151 8970 3081

Fax: +86 519 81690918


Skype: anne_chinahaining

WhatsApp: +86 151 8970 3081

Add.: No.136, Guangdian Rd.,Wujin,Changzhou city,Jiangsu,China 213000


Copyright © Changzhou optima technology Co., Ltd. All Rights Reserved | Sitemap | Technical Support:


Be a distributor